Life-size metal sculptures

Made by hand in Poland

EN

Life-Size Metal Sculptures, Made by Hand

Artistic Blacksmiths since 2005

EN

Sculptural Garden Gates

A garden gate is the first thing a visitor touches, so we treat it as a sculpture you walk through. Here a steel tree grows from the threshold, a heron stands among reeds, a bear climbs a trunk and a stork keeps the post. Each gate was made for one entrance and can be made again to your measurements.

A small gate with a whole scene in it

A wicket gate is narrow, but that is exactly what makes it a good canvas: the scene is seen up close, at eye level, every time someone comes home. We build these gates the way we build our free-standing sculptures. Trunks and branches are formed from bar and tube, bark and leaves are hammered into the surface, and birds and animals are modelled in steel and set into the frame so they read from both sides. Some gates are open, so the garden shows through the branches; others are solid, with the motif standing out in relief from a closed panel for privacy.

The motifs range from a tree that seems to grow out of the paving to herons hunting in reeds, a bear cub climbing a trunk, a fox, songbirds and a stork that carries a working mailbox. There is even a designer gate for a bin store, proof that a practical corner of the garden does not have to look plain.

Start with the solid gate with herons and a wild duck, the heron under a forest arch, the bear cub gate from the Tatra mountains and the stork postman gate with a built-in mailbox.

Built to be used every day

Behind the sculpture is a working gate. The frame, hinges and latch are sized for the weight of the decoration, and the gate can be prepared for a lock, an intercom or a self-closing hinge if you tell us at the design stage. For outdoor use the steel is protected against corrosion, usually by galvanising and painting, and the finish is chosen to suit the house and the fence it joins.

Because every gate here was made for a particular opening, treat each one as a starting point. Send us the width and height of your entrance, a photo of the posts and the motif you have in mind, and we will adapt a design or draw a new one. A gate often works best as part of a set: see our sculptural fence panels and sculptural driveway gates with the same trees and birds.

Questions buyers ask

Can you make a garden gate with a motif that is not shown here?

Yes. Every gate in this collection was designed for one client, so each is only an example. Tell us what you would like to see in your gate – a tree from your garden, a favourite bird or animal, initials or a crest – and we will design a sculptural wicket gate in steel to fit your opening.

Do you make the gate to my measurements?

Always. We need the width and height of the opening, the type of posts and a photo of the site. The gate is then made for that entrance, including hinges and latch.

Can a sculptural gate match my driveway gate and fence?

Yes, and that is often the most striking option. We can carry the same tree, birds or animals across a driveway gate, a garden gate and fence panels so the whole entrance reads as one design.

Is the gate suitable for year-round outdoor use?

Yes. The steel is protected for outdoor use, usually by galvanising and painting, and the finish is chosen for the climate where the gate will stand.

Have a piece in mind that isn't here?

Most of our sculptures began as a client's idea, a photo or a sketch. Tell us what you'd like and where it will stand.

How commissions work